1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
|
#include "cpu/io.h"
#define PORT 0x3f8 // COM1
int serial_init(void) {
outb(PORT + 1, 0x00); // Disable all interrupts
outb(PORT + 3, 0x80); // Enable DLAB (set baud rate divisor)
outb(PORT + 0, 0x03); // Set divisor to 3 (lo byte) 38400 baud
outb(PORT + 1, 0x00); // (hi byte)
outb(PORT + 3, 0x03); // 8 bits, no parity, one stop bit
outb(PORT + 2, 0xC7); // Enable FIFO, clear them, with 14-byte threshold
outb(PORT + 4, 0x0B); // IRQs enabled, RTS/DSR set
outb(PORT + 4, 0x1E); // Set in loopback mode, test the serial chip
outb(PORT + 0, 0xAE); // Test serial chip (send byte 0xAE and check if serial
// returns same byte)
// Check if serial is faulty (i.e: not same byte as sent)
if (inb(PORT + 0) != 0xAE) {
return 1;
}
// If serial is not faulty set it in normal operation mode
// (not-loopback with IRQs enabled and OUT#1 and OUT#2 bits enabled)
outb(PORT + 4, 0x0F);
return 0;
}
int is_transmit_empty() {
return inb(PORT + 5) & 0x20;
}
void write_serial(char a) {
while (is_transmit_empty() == 0)
;
outb(PORT, a);
}
|
